Linksys router setup


Hi ! I’ll tell you how to setup Linksys router
With the cable or DSL modem. You can setup any router using this process. It can be Linksys WRT54G, WRT120N, WRT160N,
E1000, E2000, E3000, E4200.. Use this process to install
any model of Linksys router. I have a Motorola modem which is connected
to my Laptop. and i can access the internet when I
connect my laptop directly to the modem. Now I am going to connect the router
in between the modem and the comnputer. First I will disconnect the
Ethernet cable from my laptop. I have a Linksys WRT54G wireless router. on the back of this Linksys router,
You will see 5 different ports. One Internet port which is standing alone.
And 4 Ethernet LAN Ports 1, 2, 3, 4. so these are 4 Ethernet LAN ports
where you can connect your computer. I will connect the modem to the
Internet or WAN port on the router. all right, so i have modem connected
to the internet port on the router. uh… I have second ethernet
cable here I’ll connect one end to the laptop
where the modem was connected before. to the same computer all right and the other end of the second Ethernet
cable to port 3 on the router. Plugged in the power cable to the router. So, on the router you will see 2 connections. The modem is connected to the Internet
or WAN port of the router. and the computer is connected to
port 3 on the router. You can connect the computer to any
one of the 4 Ethernet LAN ports of the router. You will see 4 lights on the router.
Power, WLAN/wireless, Internet and port 3. The modem is connected to the Internet port
Computer is connected to port 3. This is how you can connect the router
between the modem and the computer. This the first stage of your Linksys router setup Connections will remain same for
all the models of Linksys router. FIX HOME NETWORK
www.fixhomenetwork.com

26 Comments

Add a Comment

Your email address will not be published. Required fields are marked *